bedrijfsnieuws over Ultra-High Brightness Displays: Engineering Solutions for Direct Sunlight Applications

The Direct Sunlight Visibility Challenge

In applications ranging from automotive dashboards and marine navigation to construction equipment and outdoor payment terminals, display readability under direct sunlight remains one of the most significant engineering challenges. Conventional displays with 300-500 nits become virtually invisible in bright outdoor conditions, compromising safety and usability.

Optical Engineering Breakthroughs

The SFT0686XC-7108B-CT from Saef Technology Limited addresses this fundamental challenge through multiple optical innovations:

800 Nits Certified Brightness

With typical brightness of 800 cd/m², this display maintains excellent contrast even under 100,000 lux direct sunlight. The achievement stems from:

• Optimized 12-LED backlight array with high-efficiency light guide

• Advanced optical stack minimizing internal light loss

• High-transmittance panel design with 70% NTSC color gamut

Superior Optical Performance

• Contrast Ratio: 1500:1 (typical)

• Viewing Angles: 80°/80°/80°/80° (all directions)

• Uniformity: 80% typical across the entire panel

• Color Accuracy: CIE coordinates precisely calibrated for natural reproduction

Thermal Management: The Critical Factor

High-brightness operation generates significant heat, which can degrade performance and reduce lifespan. This module incorporates:

• Efficient thermal dissipation through optimized PCB layout

• Temperature-compensated backlight control

• Wide operating temperature range (-20°C to +70°C)

MIPI Interface: Optimized for Modern Processors

The 4-lane MIPI DSI interface provides:

• High bandwidth for the 480×1280 resolution

• Low EMI emissions critical for automotive and medical applications

• Power efficiency with separate IOVCC (1.8V) and main power domains

Design Implementation Guide

Power Sequencing

Follow the specified sequence to avoid latch-up:

1. Core power supplies (VDD, IOVCC)

2. Panel power rails (VGH, VGL)

3. Backlight activation

Signal Integrity

• Maintain 100Ω differential impedance for MIPI pairs

• Keep MIPI traces length-matched within 5mm

• Provide adequate ESD protection on all interface lines

Conclusion

For engineers designing systems that must remain readable in the most challenging lighting conditions, the SFT0686XC-7108B-CT provides a scientifically engineered solution. Its combination of ultra-high brightness, excellent optical characteristics, and robust construction makes it ideal for automotive, marine, and outdoor industrial applications. Saef Technology Limited supports these demanding applications with comprehensive technical documentation and customization expertise.